Bearing manufacturer

Effect

In terms of its function, it should be support, which literally means it is used to support the shaft, but this is only a part of its function. The essence of support is to be able to bear radial loads. It can also be understood as being used to fix the shaft. The automatic selection of quick and easy bearings is included. It is to fix the shaft so that it can only rotate, while controlling its axial and radial movement. If the motor does not have bearings, it cannot work at all. Because the shaft can move in any direction, and the motor requires the shaft to only rotate during operation. In theory, it is impossible to achieve the function of transmission. Moreover, bearings can also affect transmission. In order to reduce this effect, good lubrication must be achieved on the bearings of high-speed shafts. Some bearings already have lubrication, called pre lubricated bearings, while most bearings must have lubricating oil, which is responsible for not only increasing energy consumption due to friction during high-speed operation, but also easily damaging the bearings. The notion of converting sliding friction into rolling friction is one-sided, as there is something called sliding bearings.

matters needing attention

Generally speaking, from a usage perspective, the following points should be noted:

1. The bearing clearance should be appropriate. If it is too large, it will cause impact, while if it is too small, it will result in poor lubrication and may burn the bearings;

2. The surface quality and geometric shape of bearings and shaft necks should be strictly guaranteed;

3. Improve lubrication quality, control oil pressure, temperature, and flow rate, and strengthen oil filtration;

4. Use fuel and lubricating oil that comply with regulations.

In order to fully utilize and maintain the expected performance of bearings in the long term, regular maintenance and upkeep (regular inspections) must be carried out effectively. Early detection of faults and prevention of accidents through appropriate regular inspections are crucial for improving productivity and economy.